Location:
Search - arm9 simulator
Search list
Description: UArmJtag2.0仿真软件 功能强大、超“硬”的软件仿真器！ 博创科技最新发布的ARM调试驱动程序UArmJtag2.0是UArmJtag1.5的升级版本，是继能够成功支持ADS1.2的UArmJtag1.5后的又一重大贡献，UArmJtag2.0可以独立实现FLASH烧写功能，完全替代一般意义上的硬件仿真器，使广大高校师生和科研爱好者从高成本的ARM开发工具中解脱出来！ UArmJtag是博创科技自主研发的，超低成本，高性能的ARM仿真调试工具，支持目前市场普遍采用的并口模拟简易仿真器，使简易仿真器速度和功能达到并超过一般通用ARM硬件仿真器的水平。UArmJtag完全支持RDI 1.5.1调试协议，可以和ARM公司的SDT2.51、ADS1.2仿真开发环境配合使用。 最新的UArmJtag2.0版本保持了UArmJtag 1.5的原有功能，并增加了以下独到功能： 1、FLASH编程功能：把硬件仿真器的算法加入到了UArmJtag2.0版中，实现了对FLASH的稳定编程，编程速度达到甚至超过部分硬件仿真器的水平。使用户彻底解决了丢失BIOS数据的困扰。 2、支持ARM9在线调试：UArmJtag2.0版支持ARM7/ARM9系列嵌入式微处理器的调试，在ADS1.2开发环境下仿真调试速度达到甚至超过部分硬件仿真器的水平，稳定可靠。-UArmJtag2.0 simulation software powerful, ultra "hard" software simulator! Bo CIT latest ARM debugging driver UArmJtag2.0 UArmJtag1.5 is an upgraded version, following the success of UArmJtag1.5 ADS1.2 support of another major contribution, UArmJtag2.0 FLASH can be achieved independent of burning function completely replace the general sense of the hardware Simulator, the majority of college students and research enthusiasts from the high cost of the ARM development tools to extricate themselves! UArmJtag Bo Chong is a self-developed technology, ultra-low-cost, high-performance ARM simulation debugging tools, support for the widely used parallel simulation simple simulation, which allows for simple simulation speed and functionality meet and exceed GM ARM hardware simulator level
Platform: |
Size: 3332820 |
Author: 杨天 |
Hits:
Description: bdi2000 的使用说明文档。 BDI2000-很牛的仿真器,用它可以开发ARM7、ARM9、PowerPC860、MIPS、Xscale系列-bdi2000 the use of documentation. BDI2000-very cattle simulator, which can be developed using ARM7, ARM9, PowerPC860, MIPS, XScale series
Platform: |
Size: 179017 |
Author: 郑剑锋 |
Hits:
Description: bdi2000 的使用说明文档。 BDI2000-很牛的仿真器,用它可以开发ARM7、ARM9、PowerPC860、MIPS、Xscale系列-bdi2000 the use of documentation. BDI2000-very cattle simulator, which can be developed using ARM7, ARM9, PowerPC860, MIPS, XScale series
Platform: |
Size: 179200 |
Author: 郑剑锋 |
Hits:
Description: UArmJtag2.0仿真软件 功能强大、超“硬”的软件仿真器！ 博创科技最新发布的ARM调试驱动程序UArmJtag2.0是UArmJtag1.5的升级版本，是继能够成功支持ADS1.2的UArmJtag1.5后的又一重大贡献，UArmJtag2.0可以独立实现FLASH烧写功能，完全替代一般意义上的硬件仿真器，使广大高校师生和科研爱好者从高成本的ARM开发工具中解脱出来！ UArmJtag是博创科技自主研发的，超低成本，高性能的ARM仿真调试工具，支持目前市场普遍采用的并口模拟简易仿真器，使简易仿真器速度和功能达到并超过一般通用ARM硬件仿真器的水平。UArmJtag完全支持RDI 1.5.1调试协议，可以和ARM公司的SDT2.51、ADS1.2仿真开发环境配合使用。 最新的UArmJtag2.0版本保持了UArmJtag 1.5的原有功能，并增加了以下独到功能： 1、FLASH编程功能：把硬件仿真器的算法加入到了UArmJtag2.0版中，实现了对FLASH的稳定编程，编程速度达到甚至超过部分硬件仿真器的水平。使用户彻底解决了丢失BIOS数据的困扰。 2、支持ARM9在线调试：UArmJtag2.0版支持ARM7/ARM9系列嵌入式微处理器的调试，在ADS1.2开发环境下仿真调试速度达到甚至超过部分硬件仿真器的水平，稳定可靠。-UArmJtag2.0 simulation software powerful, ultra "hard" software simulator! Bo CIT latest ARM debugging driver UArmJtag2.0 UArmJtag1.5 is an upgraded version, following the success of UArmJtag1.5 ADS1.2 support of another major contribution, UArmJtag2.0 FLASH can be achieved independent of burning function completely replace the general sense of the hardware Simulator, the majority of college students and research enthusiasts from the high cost of the ARM development tools to extricate themselves! UArmJtag Bo Chong is a self-developed technology, ultra-low-cost, high-performance ARM simulation debugging tools, support for the widely used parallel simulation simple simulation, which allows for simple simulation speed and functionality meet and exceed GM ARM hardware simulator level
Platform: |
Size: 3332096 |
Author: 杨天 |
Hits:
Description: 這是一個arm模擬器 以C++實做
主要模擬ARM9架構-This is an arm simulator to C++ Is mainly ARM9 architecture simulation
Platform: |
Size: 742400 |
Author: shihong |
Hits:
Description: 这是学ARM9和ADS1.2的一个很好的例程，这个例程简单易懂。
这个例程可以用开发板是的LED灯和仿真器来测试硬件的好坏，
还可以CACHE对程序运行速度的影响，测试设置FCLK的频率。-This is the school ARM9 and ADS1.2 a good routine, the routine simple. This routine can be used development board is the LED lights and the hardware simulator to test the good and bad, you can run the speed CACHE on the impact of the test set FCLK frequency.
Platform: |
Size: 120832 |
Author: askdj |
Hits:
Description: 这是学ARM9和ADS1.2的一个很好的例程，这个例程简单易懂。
这个例程可以用开发板是的LED灯和仿真器来测试硬件的好坏，
还可以CACHE对程序运行速度的影响，测试设置FCLK的频率。
LED test-This is the ARM9 and ADS1.2 learn a good routine, the routine simple. This routine can be used is a development board and the LED lights simulator to test the quality of hardware, but also the speed of CACHE to run the impact of the frequency of the test set FCLK. LED test
Platform: |
Size: 30720 |
Author: iable |
Hits:
Description: A new (2008) cycle accurate and instruction set simulator for ARM9 processors.
Platform: |
Size: 6706176 |
Author: freeta |
Hits:
Description: 开源的基于SystemC的模拟器，可以模拟ARM CPU, Cache, DDR，NOR, NAND, 时序和功耗均可以正确模拟。-This simulator is a cycle-accurate system-level energy and timing simulator. Developed by Embedded Low-Power Laboratory, Seoul National University. The simulator’s underlying kernel is OSCI SystemC 2.2.0. All of the hardware modules satisfies the OSCI standards.
The simulator is composed of a CPU, cache, and memory components including DDR SDRAM, MLC NOR Flash, MLC NAND Flash, SRAM. Each memory components have it’s own memory model, which enables cycle-accurate power consumption estimation of the devices. Master and slave SystemC IPs are connected through AMBA AHB CLI (Cycle-Level Interface). You will get energy trace files for each memory devices. You will get cycle-accurate performance evaluation results CPU cycle counts information, and cache hit/miss ratio on console. Also, you can get trace files for memory devices.
The simulator exhibits performance over 500 K instructions/sec, which is fairly high for a cycle-accurate system-level simulator.
The simulator’s source co
Platform: |
Size: 4886528 |
Author: Archie |
Hits:
Description: EasyJTAG-H仿真器支持ARM7系列和ARM9的部分芯片，支持ADS1.2集成开发环境，该文档纤细介绍了其安装和应用。-EasyJTAG-H simulator supports ARM7 and ARM9 family of some chips, support ADS1.2 integrated development environment, the document describes the installation and fine application.
Platform: |
Size: 272384 |
Author: 周杰 |
Hits:
Description: 这是学ARM9和RealView MDK的一个很好的例程，这个例程简单易懂。这个例程可以用开发板是的LED灯和仿真器来测试硬件的好坏，还可以CACHE对程序运行速度的影响，测试设置FCLK的频率。-This is the ARM9 and RealView MDK learn a good routine, the routine is easy to understand. This routine can use the development board is the LED lights and the simulator to test the hardware is good or bad, you can also speed CACHE impact of the program, the test set FCLK frequency.
Platform: |
Size: 158720 |
Author: frutex |
Hits:
Description: EasyJTAG－H 仿真器是一款新的仿真器，目前，可以支持LPC2000 系列ARM7 微控制
器和部分ARM9 芯片，支持ADS1.2 集成开发环境，支持单步、全速及断点等调试功能，支持下载程序到片内FLASH和特定型号的片外FLASH，采用ARM公司提出的标准20 脚JTAG
仿真调试接口-EasyJTAG-H simulator is a new emulator, now supports LPC2000 family of ARM7 microcontrollers and some ARM9 chip, support ADS1.2 integrated development environment, supports single-step, full-speed debugging and breakpoints, support downloads program to the on-chip FLASH and the specific type of chip FLASH, the company uses ARM' s standard 20-pin JTAG debug interface simulation
Platform: |
Size: 272384 |
Author: suping |
Hits:
Description: arm9开发板mini2440上的FC模拟器实现
源代码工程，用RMDK4.22打开-arm9 board mini2440 FC simulator pjt code, use RMDK4.22 IDE to open
Platform: |
Size: 149504 |
Author: 刘军 |
Hits:
Description: J-Link是SEGGER公司为支持仿真ARM内核芯片推出的JTAG仿真器。配合IAR EWARM，ADS，KEIL，WINARM，RealView等集成开发环境支持所有ARM7/ARM9内核芯片的仿真，通过RDI接口和各集成开发环境无缝连接，操作方便、连接方便、简单易学，是学习开发ARM最好最实用的开发工具。-J-Link is the SEGGER company to support the simulation of the ARM kernel chip introduced JTAG simulator. With IAR EWARM, integrated development environment for ads, KEIL, WinARM. RealView support all ARM7/ARM9 kernel chip simulation. Through the RDI interface and the integrated development environment seamlessly, convenient operation, convenient connection, simple to learn, is the arm development to learn the best and the most practical development tools.
Platform: |
Size: 3246080 |
Author: dongshi |
Hits: